PPK Hash for eFUSE - 2020.2 English

Bootgen User Guide (UG1283)

Document ID
UG1283
Release Date
2020-12-15
Version
2020.2 English

Bootgen generates the PPK hash for storing in eFUSE for PPK to be trusted. This step is required only for RSA Authentication with eFUSE mode, and can be skipped for RSA Boot Header Authentication for the Zynq® UltraScale+™ MPSoC device. The value from efuseppksha.txt can be programmed to eFUSE for RSA authentication with the eFUSE mode.

For more information about BBRAM and eFUSE programming, see Programming BBRAM and eFUSEs (XAPP1319).

BIF File Example

The following is a sample BIF file, generate_hash_ppk.bif.

generate_hash_ppk:
{
	[pskfile] psk0.pem
	[sskfile] ssk0.pem
	[bootloader, destination_cpu=a53-0, authentication=rsa] fsbl_a53.elf
}

Command

The command to generate PPK hash for eFUSE programming is:

bootgen –image generate_hash_ppk.bif –arch zynqmp –w –o /
test.bin –efuseppkbits efuseppksha.txt