Step 5: Add More Debug Nets to the Project - 2021.1 English

Vivado Design Suite Tutorial: Programming and Debugging (UG936)

Document ID
UG936
Release Date
2021-07-14
Version
2021.1 English
  1. In Vivado® IDE, in the Flow Navigator, select Open Synthesized Design from the Netlist Analysis folder.
  2. Select the Netlist tab in the Netlist window to expand Nets. Select the following nets for debugging:
    • GPIO_BUTTONS_c(2)
    • sine (20)

    After selecting all the specified nets, right-click the nets and click Mark Debug, as shown in the following figure.



  3. You should be able to see all the nets that are marked for debug, as shown in the following figure.