Connecting the Boards and Cables - Connecting the Boards and Cables - 2021.1 English - UG936

Vivado Design Suite Tutorial: Programming and Debugging (UG936)
Document_ID
UG936
Release_Date
2021-07-14
Version
2021.1 English
  1. Connect the Digilent cable from the Digilent cable connector to a USB port on your computer.
  2. Connect the two SMA cables (for lab 5 only) as follows:
    1. Connect one SMA cable from J19 (TXP) to J17 (RXP).
    2. Connect the other SMA cable from J20 (TXN) to J66 (RXN).

The relative locations of SMA cables on the board are shown in Setup Requirements.