The status registers provide an indication of the health of the system. These registers are Read-Only and a read operation clears the register.
Status registers are cleared according to the following conditions.
- Applying
s_axi_aresetn
clears both TX and RX status registers - When a particular status register is read (clear on read)
- Applying
rx_reset
clears the RX status registers only - Applying
tx_reset
clears the TX status registers only
Hex Address | Register Name/Link to Description |
---|---|
0x0400 | STAT_TX_STATUS_REG1: 0400 |
0x0404 | STAT_RX_STATUS_REG1: 0404 |
0x0408 | STAT_STATUS_REG1: 0408 |
0x040C | STAT_RX_BLOCK_LOCK_REG: 040C |
0x0450 | STAT_TX_FLOW_CONTROL_REG1: 0450 |
0x0454 | STAT_RX_FLOW_CONTROL_REG1: 0454 |
0x0458 | STAT_AN_STATUS_REG1: 0458 |
0x0494 | STAT_RX_VALID_CTRL_CODE: 0494 |