In the Vivado Integrated Design Environment (IDE), click . In the IP Catalog tab, right-click and select Add Repository (see figure below), then select the location of the DPU IP.
Figure 1. Add Repository
The DPU IP will appear in the IP catalog page.
Figure 2.
DPU IP in
Repository
If there is an existing hardware project with an old version of the DPU, upgrading to the latest version is required, follow these steps:
- Delete the old DPU IP in the block design and IP repository.
- Add the new DPU IP into the IP repository.
- Add the new DPU IP into the block design.