To explain the card set up, this topic assumes
that you are using CentOS 7.9 on the host and have inserted the U50LV card into the PCIE
slot.
- Execute the following command to install Alveo card target platform, XRT, and
XRM.
[Host]$ cd Vitis-AI/setup/alveo [Host]$ source ./install.sh - After the script is executed successfully, manually reboot the host server
once.
.[Host]$ sudo reboot - Use the /opt/xilinx/xrt/bin/xbutilexamine
to check that the installation was successful, and the results are as
follows.
For more information on boards, see Setup Alveo Accelerator Card