Board Setup (Edge) - 2.5 English

1. Run the following command to install the cross-compilation system environment.

   
   [Host]$ cd Vitis-AI/setup/mpsoc
   [Host]$ ./host_cross_compiler_setup.sh

2. Download and set up the board Image.
   • Download the SD card system image files from the Xilinx website.

     Use ZCU102 for an example (Registration is required for downloading this system image file from this public link).

   • Use the Etcher software to burn the image file onto the SD card.
   • Insert the SD card with the image into the destination board.
   • Plug in the power and boot the board using the serial port to operate on the system.
   • Set up the IP information of the board using the serial port.

For more information on boards, see MPSOC Setup and VCK190 Setup.