カードが正常に設置され、ファームウェアがアップデートされたら、カードとシステムのプラットフォームおよびサテライト コントローラー (SC) のバージョンが一致している必要があります。一致しない場合、システムでカード上のアプリケーションが正しく実行されません。
これらが一致していることを確認するには、次のコマンドを実行し、[
Flashable
partitions
running on
FPGA
] と [Flashable partitions installed in
system
] の [Platform] および [SC Version] を比較します。デバイス管理 BDF の取得方法は、カードの BDF 値の取得 を参照してください。$ sudo /opt/xilinx/xrt/bin/xbmgmt examine --device <management BDF>
次の出力例では、[Flashable partitions running on FPGA
] および [Flashable partitions installed in
system
] の下に表示されるプラットフォーム (xilinx_vck5000_gen3x16_xdma_base_1) と SC バージョン (4.4.12) が一致していることが示されています。
Flash properties
Type : ospi_versal
Serial Number : XFL1MXCRDXXX
Device properties
Type : vck5000
Name : VCK5000-P
Config Mode : 8
Max Power : 300W
Flashable partitions running on FPGA
Platform : xilinx_vck5000_gen3x16_xdma_base_1
SC Version : 4.4.12
Platform UUID : 1E56042E-C345-CF41-5D66-4E9EE73451FC
Interface UUID : C9BFF99C-95E9-6917-ECDB-82F3C2927C27
Flashable partitions installed in system
Platform : xilinx_vck5000_gen3x16_xdma_base_1
SC Version : 4.4.12
Platform UUID : 1E56042E-C345-CF41-5D66-4E9EE73451FC
Mac Address : 00:0A:35:0D:09:98
: 00:0A:35:0D:09:99
注記: SC バージョン 4.4.9 では、MAC アドレスが 2 つではなく誤って 4 つレポートされます。詳細は、既知の問題 を参照してください。