The programming module has two micro-USB connectors (call-outs 2 and 3 in Figure 1), one for each FT4232 USB to multi-protocol converter. Connect the external micro-USB cable from the host to the micro-USB connector 1 (call-out 2 in Figure 1). The micro-USB connector number 2 should be left unused (call-out 3 in Figure 1). The pin description of the micro-USB connector is listed in the following table.
Pin Number | Signal Name | Functionality |
---|---|---|
1 |
USB_VBUS
|
USB power |
2 |
USB_DN
|
USB differential data – |
3 |
USB_DP
|
USB differential data + |
4 |
USB_ID
|
USB ID |
5 |
GND
|
Ground |
6 |
GND
|
Shield ground |
7 |
GND
|
|
8 |
GND
|
|
9 |
GND
|
|
10 |
GND
|
|
11 |
GND
|