Product Details

Kria KV260 Vision AI Starter Kit Data Sheet (DS986)

Document ID
Release Date
1.2 English

The Kria KV260 Vision AI Starter Kit is an evaluation platform for the K26 SOM focused on machine learning (ML) acceleration in vision applications. The kit brings together a Zynq UltraScale+ MPSoC based SOM with user selectable, vision focused peripherals and a set of pre-built accelerated applications. The KV260 and its base K26 SOM are supported for full user customization through AMD Vitis™ platforms, customizable acceleration overlays, and AMD Vivado™ tools hardware board files. The integrated combination of hardware, platform, and software provides a quick out-of-box experience for developers that can then be leveraged for product designs.

Note: The SOM on the Kria KV260 Vision AI Starter Kit does not populate the eMMC.
Figure 1. KV260 Starter Kit Block Diagram

Table 1. Kria KV260 Vision AI Starter Kit Product Details
Specification Description
Thermal cooling solution Active
Weight 205g
Form factor SOM + Carrier Card
Dimensions of the KV260 Starter Kit 123 mm x 140 mm x 36 mm
Dimensions of the SOM with thermal solution 60 mm x 77 mm x 27 mm
Dimensions of the carrier card 123 mm x 140 mm x 23 mm
System logic cells 256K
Block RAM blocks 144
UltraRAM blocks 64
DSP slices 1.2K
Ethernet interface One 10/100/1000 Mb/s
DDR memory 4 GB (4 x 512 Mb x 16 bit) [non-ECC] DDR4
Primary boot memory 512 Mb QSPI
Secondary boot memory microSD card
Device Security Zynq UltraScale+ MPSoC hardware root of trust (RoT) in support of secure boot.

Infineon TPM2.0 in support of measured boot.

Image sensor processor OnSemi AP1302 13MP ISP
IAS MIPI sensor interfaces x2
Raspberry Pi camera interface x1
PMOD 12-pin interface x1
USB3.0 interface x4
DisplayPort 1.2a x1
HDMI 1.4 x1