The below gives the testing procedure of zynqmp USB DFU example
Testing procedure
On ZCU102 board side
-
Download and run the generated dfu example
On HOST side On Linux
-
Install dfu-util binaries in linux host. Please refer http://dfu-util.sourceforge.net/build.html
-
Connect DFU device (Alto device running DFU example)
-
dfu-util –l (check our DFU Boot Image downloader)
-
dfu-util –D boot.bin
On Windows Install Windows driver for DFU devices in host machine
-
Download Zadig tool from http://zadig.akeo.ie/ and install
-
Connect DFU device (Alto device running DFU example)
-
Open zadig and select DFU device and install WinUSB driver
Running dfu-util and downloading files
-
Install DFU utils
-
Launch 'cmd' (make sure your path is that where dfu-util.exe is)
-
dfu-util –l (check our DFU Boot Image downloader)
-
dfu-util –D boot.bin –t 1024
Expected Output