Step 11: Execute the Software Application on a SP701 Board - 2024.2 English

IMPORTANT! Make sure that you have connected the target board to the host computer and it is turned on.

1. To start the session, click on the Run icon under Flow > Component [peripheral_tests] > Run.

   

2. The Debug perspective window opens, if the testperiph.c file is not already open, select ../src/testperiph.c, and double-click to open the source file.

   

1. Configure your terminal program (e.g., TeraTerm, Putty) to connect to the SP701 Serial Port with the settings shown below.

   • Baud rate = 9600

   • Data bits = 8

   • Stop bits = 1

   • Flow control = None

   • Parity = None