Hardware and Software Requirements - XAPP1361

The following hardware and software are required for this application note:

• AMD ZCU102 Evaluation Board (revision 1.0 or later, with production silicon)
• AC to DC power adapter (12 VDC)
• USB Type-A to Micro-B USB cable for UART communication
• Secure Digital (SD-MMC) card ≤ 32 GB
• AMD Vivado™ 2021.1 or later
  Note: This application note is verified against 2021.1, 2021.2, and 2022.1 versions.
• Integrating AMD LogiCORE™ SEM IP. Refer to Integrating LogiCORE SEM IP in Zynq UltraScale+ Devices (XAPP1298) and the associated reference design files.
• AMD Vitis™ unified software development platform 2021.1 or later.
  Note: Future versions of the Vitis unified software platform have not been verified with this application note.
• Serial communication terminal application (Tera Term or PuTTY)
• Required associated reference design files that can be downloaded from the AMD website.