Enable HD.ISOLATED on Config2 RMs using Post-Synth Tcl Hook Script - XAPP1361

Isolation Design Flow + Dynamic Function eXchange Example Application Note (XAPP1361)
Document ID
XAPP1361
Release Date
2024-05-23
Revision
1.2 English
Important: These steps can be executed as an alternative to the previous two steps that enabled IDF on the rp1rm2 and rp2rm2 RMs. This step must be performed before launching the Synthesis in the previous section.
  1. Create a file with the following contents and name the file rp1_rm2_post_synth_tcl.tcl.
    set_property HD.ISOLATED true [get_cells shift] -quiet write_checkpoint -force -noxdef rp_shift.dcp
  2. Create one more file with the following contents and name the file rp2_rm2_post_synth_tcl.tcl.
    set_property HD.ISOLATED true [get_cells count] -quiet write_checkpoint -force -noxdef rp_count.dcp
  3. Add the created files to the project by running the following commands from the Tcl console.
    add_files -fileset utils_1 -norecurse ./rp1_rm2_post_synth_tcl.tcl
add_files -fileset utils_1 -norecurse ./rp2_rm2_post_synth_tcl.tcl
  4. Add rp1_rm2_post_synth_tcl.tcl and rp2_rm2_post_synth_tcl.tcl files as post-synth Tcl Hook scripts for the corresponding synthesis runs by running the following commands from the Tcl console:
    set_property STEPS.SYNTH_DESIGN.TCL.POST [ get_files ./rp1_rm2_post_synth_tcl.tcl -of [get_fileset utils_1] ] [get_runs shift_left_synth_1]
set_property STEPS.SYNTH_DESIGN.TCL.POST [ get_files ./rp2_rm2_post_synth_tcl.tcl -of [get_fileset utils_1] ] [get_runs count_down_synth_1]
  5. Launch Synthesis.