These documents provide supplemental material useful with this application note:
- Kintex 7 FPGAs Data Sheet: DC and AC Switching Characteristics (DS182)
- Virtex 7 FPGAs Data Sheet: DC and AC Switching Characteristics (DS183)
- 7 Series FPGAs GTX/GTH Transceivers User Guide (UG476)
- SMPTE UHD-SDI LogiCORE IP Product Guide (PG205)
- Implementing SMPTE SDI Interfaces with Kintex 7 GTX Transceivers (XAPP592)
-
Clock and Data Recovery Unit based on Deserialized Oversampled Data
(XAPP1240)
The following references are available from the Society of Motion Picture and Television Engineers (www.smpte.org)
- RP 165: Error Detection Checkwords and Status Flags for Use in Bit-Serial Digital Interfaces for Television
- RP 168: Definition of Vertical Switching Point for Synchronous Video Switching
- ST 259: Television - SDTV Digital Signal/Data - Serial Digital Interface
- ST 291-1: Television - Ancillary Data Packet and Space Formatting
- ST 292-1: 1.5 Gb/s Signal/Data Serial Interface
- ST 344: Television - 540 Mb/s Serial Digital Interface
- ST 352: Payload Identifier Codes for Serial Digital Interfaces
- ST 372: Dual Link 1.5 Gb/s Digital Interface for 1920x1080 and 2048 x 1080 Picture Formats
- ST 424: Television - 3 Gb/s Signal/Data Serial Interface
- ST 425-1: Source Image Format and Ancillary Data Mapping for the 3 Gb/s Serial Interface
- ST 2081-1: 6 Gb/s Signal/Data Serial Interface - Electrical
- ST 2082-1: 12 Gb/s Signal/Data Serial Interface - Electrical