Step 5: Determining the Percentage of Design Metrics

Replacing FMEA with Datapath Analysis for IP Designs (WP545)

Document ID
WP545
Release Date
2023-06-14
Revision
1.0 English

For each connection between a block, for each block, and for each diagnostic that includes support for error reporting, a percentage of logic is required to complete the failure mode effects and diagnostic analysis required for certification by the system integrator (customer). These metrics can be estimated or complied after implementation. They are expressed as the percentage of the whole IP design.

Note: See the addition of the connection to the added b3_b7_signaling for the diagnostic in block 7 in the table in Block 3 Tab with Percentage of Design.