Making Ports External - 2023.2 English

Vivado Design Suite User Guide: Designing IP Subsystems Using IP Integrator (UG994)

Document ID
UG994
Release Date
2023-10-18
Version
2023.2 English
  1. To connect signals or interfaces to external ports on a diagram, first select a pin, bus, or interface connection, as shown in the following figure.
  2. Right-click and select Make External.

    You can also select Ctrl + Click to select multiple pins and invoke the Make External command for all pins at one time.



    This command ties a pin on an IP to an I/O port on the BD. IP Integrator connects the port on the IP to an external I/O.