sli - 2024.2 English

Description

Stores the contents of register rD_L, into the long aligned memory location that results from adding the contents of registers rA_L and the sign-extended IMM value.

A data TLB miss exception occurs if virtual protected mode is enabled, and a valid translation entry corresponding to the address is not found in the TLB.

A data storage exception occurs if virtual protected mode is enabled, and access is prevented by no-access-allowed or read-only zone protection. No-access-allowed can only occur in user mode.

An unaligned data access exception occurs if the three least significant bits in the address are not zero.

Pseudocode

Addr ← (rAL) + sext(IMM)
if TLB_Miss(Addr) and MSR[VM] = 1 then
   ESR[EC] ← 10010; ESR[S] ← 1
   MSR[UMS] ← MSR[UM]; MSR[VMS] ← MSR[VM]; MSR[UM] ← 0; MSR[VM] ← 0
else if Access_Protected(Addr) and MSR[VM] = 1 then
   ESR[EC] ← 10000; ESR[S] ← 1 ; ESR[DIZ] ← No-access-allowed
   MSR[UMS] ← MSR[UM]; MSR[VMS] ← MSR[VM]; MSR[UM] ← 0; MSR[VM] ← 0
else if Addr[C_ADDR_SIZE-3:C_ADDR_SIZE-1] ≠ 0 then
   ESR[EC] ← 00001; ESR[W] ← 1; ESR[S] ← 1; ESR[Rx] ← rD
else
   Mem(Addr) ← (rDL)

Registers Altered

• MSR[UM], MSR[VM], MSR[UMS], MSR[VMS], if a TLB miss exception or a data storage exception is generated
• ESR[EC], ESR[S], if an exception is generated
• ESR[DIZ], if a data storage exception is generated
• ESR[W], ESR[Rx], if an unaligned data access exception is generated

Latency

• 2 cycles with C_AREA_OPTIMIZED=0 or 2
• 3 cycles with C_AREA_OPTIMIZED=1

Notes

• By default, Type B store immediate instructions will take the 16-bit IMM field value and sign extend it to 64 bits to use as the immediate operand. This behavior can be overridden by preceding the Type B instruction with an imm or imml instruction.