Running MicroBlaze Block Automation - 2024.1 English - UG911

ISE to Vivado Design Suite Migration Guide (UG911)
Document ID
UG911
Release Date
2024-05-30
Version
2024.1 English
  1. In the block design, add the MicroBlaze IP.
  2. Select Run Block Automation for MicroBlaze_0.
  3. In the Run Block Automation dialog box, make selections based on the information provided in the above table.
    Tip: The AXI Interconnect instance for AXI4-Lite slave peripherals is called microblaze_0_axi_periph if Interrupt or UART is enabled for Debug from the table. Connection Automation adds this AXI Interconnect instance when connecting the first AXI Slave (typically AXI4-Lite interface).
  4. For the Clock Connection, select Clocking Wizard or New External Port, depending on the connections in XPS.
  5. If MIG is used:
    1. Instantiate and configure the MIG.
    2. Select the clock (typically, the 100 MHz clock) that is determined for the MicroBlaze clock.