- After selecting Next to
progress past the introduction, the first content page allows you to define new
RMs for any Partition Definitions (PD) defined. The first RM for each PD has
already been included here, if the RTL/netlist source was present when the PD
was created. Click the blue + to create a
new RM and give it a unique name. Be sure to select the correct PD if more than
one exists in the design. If netlist sources are selected, select the Sources are already synthesized check box and
declare the Top Module within the netlist.
- Repeat this process for all existing RMs for every Partition
Definition. If a greybox module is desired, no action is required, because this
is a built-in Vivado Design Suite feature that requires no
sources. RMs can be edited by clicking on the pencil icon or removed by clicking
the red - icon. When all RMs are
accounted for, click Next.