Editing Reconfigurable Modules - 2024.1 English

Vivado Design Suite User Guide: Dynamic Function eXchange (UG909)

Document ID
UG909
Release Date
2024-06-12
Version
2024.1 English
  1. After selecting Next to progress past the introduction, the first content page allows you to define new RMs for any Partition Definitions (PD) defined. The first RM for each PD has already been included here, if the RTL/netlist source was present when the PD was created. Click the blue + to create a new RM and give it a unique name. Be sure to select the correct PD if more than one exists in the design. If netlist sources are selected, select the Sources are already synthesized check box and declare the Top Module within the netlist.

  2. Repeat this process for all existing RMs for every Partition Definition. If a greybox module is desired, no action is required, because this is a built-in Vivado Design Suite feature that requires no sources. RMs can be edited by clicking on the pencil icon or removed by clicking the red - icon. When all RMs are accounted for, click Next.