The Design Utilization Summary table provides the utilization for the static domain and for each RP. The data in this table is based on resource information determined by the design floorplan, so this section of the Report DFX Summary output is only valid when a Pblock has been supplied for each Reconfigurable Partition.
Note: For more information about design utilization,
use the
report_utilization
Tcl command.Column | Description |
---|---|
Used | Number of resources used in the Pblock |
Util % | Percentage of resources used out of the available resources in Pblock |
Pblock Available | Total resources available in the area defined by the Pblock |
Pblock Avail % in Device | Portion of the total device resource included in the RP Pblock |
Figure 1. RP Utilization Table
Column | Description |
---|---|
Used | Resources used in the static domain |
Util % | Percentage of resources used out of the available resources in the Pblock |
Static Available | Total resources available for the static domain excluding the sum of all resources of all RP Pblocks from the total available device resources |
Static in Device % | Portion of total device resources available in the static domain |
Figure 2. Static Utilization Table