Following are the steps needed to create an STAPL target after initially launching Vivado or Vivado Lab Edition:
open_hw_manager
connect_hw_server
create_hw_target -stapl my_stapl_target
if {[string length [get_hw_targets -quiet -filter {IS_OPENED == TRUE}]] > 0} \
{close_hw_target [get_hw_targets * -filter {IS_OPENED == TRUE}]};
open_hw_target [get_hw_targets -regexp .*my_stapl_target]
current_hw_target
The first two commands can be omitted if already connected to a server.
When executed, the create_hw_target command defines the
my_stapl_target.
Finally, after closing any open target and opening the STAPL target, the
create_hw_target command is run. As a result, the
final command shows the full hardware target handle name of the created my_stapl_target.
All standard operations on the target, such as get_hw_targets and open_hw_target
commands, are supported. You can use the IS_STAPL hardware target property to
distinguish between a live target and an STAPL target. For example, the following is a
sample command line that reads the IS_STAPL property from a target named
"my_stapl_target."
get_property IS_STAPL [get_hw_targets -regexp .*my_stapl_target]Additionally, you can display all the STAPL hw_targets created in this session by issuing the following command:
get_hw_targets -filter {IS_STAPL}To delete the created target, use the delete_hw_target command. For example, by issuing the following command,
the my_stapl_target is deleted:
delete_hw_target [get_hw_targets -regexp .*my_stapl_target]