The Vivado Design Suite provides metrics to inform you about logic and routing inside the device. They provide an interactive way of analyzing a design rather than a static report.
Use the following instructions to enable and configure metrics in the Device window:
- Make sure a design is open.
- Select .
- To enable a metric, right-click and select Show. More than one metric can be added at a time.
- To disable a metric, right-click it and select Hide to remove it from the Device view.
- Select Hide All Metrics to clear all selected metrics at the same time.
The following figure shows an example of the LUT Utilization per CLB metric:
Figure 1. LUT Utilization per CLB Metric
- Metrics Window
- Lists available metrics that you can display using the right-click menu.
- Metric Properties Window
- Shows the color bins used to grade the selected metric. You can enable or disable bins, change their colors, add new bins, or remove existing ones.
- Device Window
- Overlays the metric bins showing the physical location where the metric levels have a higher impact.
- Metric Results Window
- Enables you to select results and cross-probe them with other design elements.