Report I/O - 2025.2 English - UG906

When you generate the I/O Report, the tool lists the following information:

Pin Number

Lists all the pins in the device

Signal Name

Shows the name of the user I/O assigned to each pin

Bank Type

Indicates the bank type where the I/O is located (for example, High Range, High Performance, Dedicated)

Pin Name

Displays the name of the pin

Use

Describes the I/O usage type (for example, Input, Output, Power/Ground, Unconnected)

I/O Standard

Shows the I/O standard for the user I/O; an asterisk (*) indicates the default standard. This field might differ from what is shown in the I/O ports window of the Vivado IDE

I/O Bank Number

Identifies the I/O Bank where the pin is located

Drive (mA)

Displays the drive strength in milliamps

Slew Rate

Shows the slew rate configuration of the buffer (Fast or Slow)

Termination

Lists the on-chip or off-chip termination settings

Voltage

Displays voltage values for relevant pins, including VCCO, VCCAUX, and related pins

Constraint

Displays Fixed if you have constrained the pin

Signal Integrity

Reports the signal integrity value for each pin