The Other Path Groups section of the Timing Summary Report shows both default and user-defined path groups.
To view this section:
- In the left index pane, select Other Path Groups.
- Review the summary table that lists each path group.
Figure 1. Timing Summary Report: Path Groups Section
This section includes any groups you define with the group_path command,
along with default groups.
Tip: The
**async_default** group is automatically created by the Vivado IDE timing engine. It includes all paths that end
with asynchronous checks, such as recovery and removal:- Recovery checks appear under the SETUP category (max delay analysis).
- Removal checks appear under the HOLD category (min delay analysis).
group_path command
also appear in this section. A path group can include any combination of source and
destination clocks.