Figure 1. Report Bus Skew Dialog Box: Options Tab
The Report Bus Skew Dialog Box Options tab includes the following sections:
- Report
-
- Delay type: Sets the type of delay used in analysis, such as max, min, or both. Determines how the tool calculates and reports path delays. Refer to the Report Section for details on each type.
- Report unique pins: Limits the report to one timing path
per unique combination of input and output pins. Use this to reduce
duplicate or redundant paths in the report.
- Equivalent Tcl option:
-unique_pins
- Equivalent Tcl option:
- Path Limits
-
- Number of paths per group: Sets the maximum number of timing paths to report for each clock group or constraint group. Refer to the Report Timing Summary section for more details on how grouping is handled.
- Number of paths per endpoint: Sets the number of timing paths reported for each endpoint pin. This helps you focus on the worst-case paths for each destination. Refer to the Report Timing Summary for context.
- Path Display
- Number of significant digits: Controls how many significant digits are displayed for delay and slack values in the report. Refer to the Report Timing Summary section for examples and recommendations.