Method 2: Checking Hold Timing on the Worst Failing Setup Path - 2025.2 English - UG906

Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906)
Document ID
UG906
Release Date
2025-12-10
Version
2025.2 English
  1. Identify the worst failing setup path.
  2. In the Vivado IDE, right-click the path and run a timing report from source to destination.
  3. Run the following command to view hold timing:
    report_timing -hold
  4. Verify the hold requirement and check whether additional delay was added to meet hold timing.
Figure 1. Running a Timing Report on Specific Paths