Cross Probing Between Timing Report and Device Window Example - 2024.1 English

Vivado Design Suite User Guide: Implementation (UG904)

Document ID
UG904
Release Date
2024-06-05
Version
2024.1 English

The following figure shows an example of cross probing between the Timing Summary report and the Device window. The following steps take place in this Non-Project Mode example:

  • A post-route design checkpoint is opened in the Vivado IDE.
  • The Timing Summary report is generated and opened using report_timing_summary -name.
  • The Routing Resources are enabled in the Device window.
  • When the timing path is selected in the Timing Summary report, cross probing on the path occurs automatically in the Device window, as shown in the following figure.
Figure 1. Cross-Probing Between Timing Report and Device Window

For more information on analyzing reports and strategies for design closure, see the Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906).