Assigning Routing to a Branch - 2024.2 English

Vivado Design Suite User Guide: Implementation (UG904)

Document ID
UG904
Release Date
2024-11-14
Version
2024.2 English
To assign routing to a branch:
  1. Go to Device window.
  2. Select the net to be routed.
  3. Right-click and select Enter Assign Routing Mode.

    The Assign Routing Mode: Target Load Cell Pin window opens, showing all loads.

    Note: The loads that already have assigned routing have a checkmark in the Routed column of the table.


  4. Select the load to which you want to route.
  5. Click OK. The Assign Routing Mode: Branch Start dialog box, shown in the following figure, opens.

  6. Select the node from which you want to branch off the route for your selected load.
  7. Click OK.
  8. Follow the steps shown in Assigning Routing Nodes.