The log_wave
command logs simulation output for viewing specified
HDL objects with the Vivado simulator waveform viewer. Unlike
add_wave
, the log_wave
command does not add
the HDL object to the waveform viewer (that is, the Waveform Configuration). It
simply enables the logging of output to the Vivado simulator Waveform Database
(WDB).
Tip: To display object values prior to the time of insertion, the simulation
must be restarted. To avoid having to restart the simulation because of missing
value changes: issue the log_wave -r / Tcl command at the start of a simulation run
to capture value changes for all display-able HDL objects in your design.
Syntax:
log_wave [-recursive] [-r] [-quiet] [-verbose] <hdl_objects>...
Example log_wave Tcl Command Usage
To log the waveform output for:
- All signals in the design (excluding those of alternate top modules):
log_wave -r /
- All signals in a scope: /tb:
log_wave /tb/*
- Those objects having names that start with a and end in b and have digits in
between:
log_wave [get_objects -regexp {^a[0-9]+b$}]
- All objects in the current scope and all child scopes, recursively:
log_wave -r *
- Temporarily overriding any message limits and return all messages from the
following command:
log_wave -v
- The objects in the current scope:
log_wave *
- Only the ports of the scope
/tb/UUT
, use the command:log_wave [get_objects -filter {type == in_port || type == out_port || type == inout_port || type == port} /tb/UUT/*]
- Only the internal signals of the scope
/tb/UUT
, use the command:log_wave [get_objects -filter {type == signal} /tb/UUT/*]
The wave configuration settings, which include the signal order, name style, radix, and color are saved to the wave configuration (WCFG) file upon demand. See Analyzing Simulation Waveforms with Vivado Simulator.