Using the Advanced I/O Planner - 2024.2 English

Using the Advanced I/O Planner - 2024.2 English - UG899

Vivado Design Suite User Guide: I/O and Clock Planning (UG899)

Document ID

UG899

Release Date

2024-11-13

Version

2024.2 English

To create a new IO planning project, complete the following steps:

Launch Vivado and create a new project targeting a Versal device as described in this step.
1. In the Quick Start section, select Create Project.
2. Click Next.
3. In the Project Name page, specify Project name, Project location, and check Create project subdirectory.
4. Click Next.
5. In the Project Type page, select RTL Project and Do not specify sources a this time.
6. Click Next.
7. In the Default Part page, navigate to the board tab. For XPIO, select Versal VCK190 Evaluation Platform.
  
  For X5IO, select xcvm2152-ff8888-1LP-e-S under the Parts tab.
8. Click Next.
  The New Project Summary page is displayed.
9. Click Finish.
When the project setup is complete, click IP Catalog in the Flow Navigator under the PROJECT MANAGER heading.
In the IP Catalog window, search Advanced IO Wizard IP (for XPIO) or search X5IO Wizard IP (for X5IO) and double-click it to open the Customize IP dialog box.
In the Customize IP dialog box, leave the IP configurations at default values and click OK to add the IP to the project.

The following is for IP configuration for X5IO:
After the IP is added, a window named Generate Output Products appears for generating OOC products for the newly added IP. Click Generate.