The MIPI D-PHY standard MIPI_DPHY and MIPI_DPHY_DCI (HP I/O banks only) is intended for use in mobile devices including cameras, displays, and unified protocol interfaces. This standard is supported in the HP and XP5IO I/O banks. Support for this standard in Spartan UltraScale+ devices is in adherence to the MIPI Alliance interface specifications.
Important: MIPI_DPHY_DCI (HP banks only), as
with other DCI standards, requires a 240 Ω external resistor at the VRP Pin. This standard
does leverage calibration on the LP driver even though the values for the OUTPUT_IMPEDANCE
attribute are not configurable.