set_noc_phase - 2024.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2024-05-30
Version
2024.1 English

Add/modify a phase to all traffic paths within the provided phase group.

Syntax

set_noc_phase [‑phase_group <arg>] [‑phase <arg>] [‑master_instance <arg>]
    [‑slave_instance <arg>] [‑read_bandwidth <arg>]
    [‑write_bandwidth <arg>] [‑mode <arg>] [‑port <arg>] [‑quiet]
    [‑verbose]

Usage

Name Description
[-phase_group] Name of the phase group which will include or already contain the provided phase Default: Group_Default
[-phase] Name of the phase to add or modify Default: Phase_Default
[-master_instance] The master instance of the traffic path to add or modify the provided phase
[-slave_instance] The slave instance of the traffic path to add or modify the provided phase
[-read_bandwidth] The read bandwidth of the phase to add or modify Default: 0
[-write_bandwidth] The write bandwidth of the phase to add or modify Default: 0
[-mode] Determines whether this is a read(READ)/write(WRITE) phase or both(ALL). Default: ALL
[-port] Specifies the port of a slave instance the traffic path connects to. Default: PORT0
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

NOC