A Zynq PCIe Root Complex design can be implemented in a number of different ways. The following figure shows an example of a basic design using the AXI PCIe bridge described in the AXI Memory Mapped to PCI Express (PCIe) Gen2 LogiCORE IP Product Guide (PG055).
Figure 1. Example Zynq
PCIe Root Complex
Note: The AXI PCIe bridge master and slave ports
are connected to separate AXI interconnects to avoid potential deadlock
scenarios.
The compiled Linux kernel already has the required AXI PCIe bridge driver enabled, so no additional configuration is needed. Software drivers for the connected endpoint device might need to be installed.
For information on building the Linux kernel for Zynq, refer to the AMD Zynq Linux Wiki.