Resets - Resets - 1.15 English - UG585

Zynq 7000 SoC Technical Reference Manual (UG585)

Document_ID
UG585
Release_Date
2026-02-06
Version
1.15 English

The PS reset subsystem provides four programmable reset signals to the PL. The reset signals are controlled by writing to the slcr.FPGA_RST_CTRL SLCR[FPGA[3:0]_OUT_RST] bit fields. The resets are independently programmed and are completely independent of the PL clocks and all other PS-PL signals. The PS reset subsystem is described in Reset System.

The PL clocks and resets are summarized in the following table.

Table 1. PL Clock and Reset Signals
Type PL Signal Name I/O Reference
PL Clocks FCLKCLK[3:0] O Clocks
PL Clock Throttle Control FCLKCLKTRIG [3:0] I
PL Resets FCLKRESETN [3:0] O Reset System