The write-only memc_cfg_clr enables the SMC to be moved out of the low-power state, and the interrupts disabled. You cannot write to this register in the Reset state.
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
|
XNANDPS_MEMC_CLR_CONFIG_ECC_INT_DISABLE1_MASK (ECC_INT_DISABLE1) |
6 | wo | x |
NAND Flash ECC interrupt disable: 0: No change 1: Disable |
| reserved | 5 | wo | x | Reserved. Do not modify. |
|
XNANDPS_MEMC_CLR_CONFIG_INT_CLR1_MASK (INT_CLR1) |
4 | wo | x |
0: No effect 1: Clear SMC Interrupt 1 as an alternative to an AXI read |
|
XNANDPS_MEMC_CLR_CONFIG_INT_CLR0_MASK (INT_CLR0) |
3 | wo | x |
0: No effect 1: Clear SMC Interrupt 0 as an alternative to an AXI read |
|
XNANDPS_MEMC_CLR_CONFIG_LOW_POWER_EXIT_MASK (LOW_POWER_EXIT) |
2 | wo | x |
Exit low-power mode. The affect takes place when memory interface goes idle: 0: No change 1: Exit from low-power state |
|
XNANDPS_MEMC_CLR_CONFIG_INT_DISABLE1_MASK (INT_DISABLE1) |
1 | wo | x |
NAND Flash interrupt disable: 0: No change 1: disable (apply mask) |
|
XNANDPS_MEMC_CLR_CONFIG_INT_DISABLE0_MASK (INT_DISABLE0) |
0 | wo | x |
SRAM/NOR interrupt disable: 0: No change 1: disable (apply mask) |