Register OCM_PARITY_CTRL Details - Register OCM_PARITY_CTRL Details - 1.15 English - UG585

Zynq 7000 SoC Technical Reference Manual (UG585)

Document_ID
UG585
Release_Date
2026-02-06
Version
1.15 English
Field Name Bits Type Reset Value Description
reserved 31:21 ro 0x0 Returns 0 when read
OddParityEn 20:5 rw 0x0

Enable RAM Odd Parity Generation. The default computed parity is even but this can be changed to odd parity via this APB register field.

Note that, on reads, parity is always computed as even parity. The odd parity generation option is useful for verification purposes, enabling parity errors to be injected. One control bit per data byte (OddParity[0] controls Data[7:0] e.t.c)

0: Even Parity generated

1: Odd

Parity generated

LockFailErrIrqEn 4 rw 0x0

Enable interrupt when

an AXI LOCK ("locked access") command is detected.

MultipleParityErrIrqEn 3 rw 0x0

Same as SingleParityErrIrqEn, but enables IRQ on multiple parity errors detected.

0: IRQ is not generated when parity error detected and ParityCheckDis=0

1: IRQ is generated when parity error detected and ParityCheckDis=0.

SingleParityErrIrqEn 2 rw 0x0

Enable interrupt when a single parity error is detected. Note that even if this field is 0, the OCM_IRQ_STS register will still log the error if ParityCheckDis=0. This allows software the option of polling if an error occurred.

0: IRQ is not generated when parity error detected and ParityCheckDis=0

1: IRQ is generated when parity error detected and ParityCheckDis=0.

RdRespParityErrEn 1 rw 0x0

Enable AXI read 'SLVERR' response for parity error detection.

0: Error will not be sent on AXI read channel when parity error detected

1: Error will be sent on AXI read channel when parity error detected and ParityCheckDis=0

ParityCheckDis 0 rw 0x0

Disable RAM Parity Checking. No checking or logging of status will occur when 1.

0: RAM Parity checking is enabled

1: RAM Parity checking is disabled