| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| reserved | 31:14 | rw | 0x0 | reserved |
| DisableRcvr | 13 | rw | 0x0 |
Disable HSTL Input Buffer to save power when it is an output-only (IO_Type must be HSTL). 0: enable 1: disable |
| PULLUP | 12 | rw | 0x1 |
Enables Pullup on IO Buffer pin 0: disable 1: enable |
| IO_Type | 11:9 | rw | 0x3 |
Select the IO Buffer Type. 000: Reserved 001: LVCMOS18 010: LVCMOS25 011: LVCMOS33 100: HSTL 101: Reserved 110: Reserved 111: Reserved |
| Speed | 8 | rw | 0x0 |
Select IO Buffer Edge Rate, applicable when IO_Type is LVCMOS18, LVCMOS25 or LVCMOS33. 0: Slow CMOS edge 1: Fast CMOS edge |
| L3_SEL | 7:5 | rw | 0x0 |
Level 3 Mux Select 000: GPIO 0 (bank 0), Input/Output others: reserved |
| L2_SEL | 4:3 | rw | 0x0 |
Level 2 Mux Select 00: Level 3 Mux 01: SRAM/NOR Chip Select 0, Output 10: NAND Flash Chip Select, Output 11: SDIO 0 Power Control, Output |
| L1_SEL | 2 | rw | 0x0 |
Level 1 Mux Select 0: Level 2 Mux 1: reserved |
| L0_SEL | 1 | rw | 0x0 |
Level 0 Mux Select 0: Level 1 Mux 1: Quad SPI 1 chip select, Output |
| TRI_ENABLE | 0 | rw | 0x1 |
Tri-state enable, active high. 0: disable 1: enable |