Register Initialization to Optimize Boot Times - Register Initialization to Optimize Boot Times - 1.15 English - UG585

Zynq 7000 SoC Technical Reference Manual (UG585)

Document_ID
UG585
Release_Date
2026-02-06
Version
1.15 English

The clocking and I/O configuration can be modified before the FSBL/User code is accessed by using the register initialization parameters in the BootROM Header. These settings can be matched to the specific device used and the board layout. Register initialization takes a negligible amount of time, but can have a drastic effect on performance while copying the FSLB/User code to the OCM memory or routing it to the decryption unit in the PL. Many of the optimizations done via register initialization are only available in non-secure boot mode as listed in Table 1. Secure mode optimizations are limited to clocking controls for the clock subsystem (not the IO controller).

There are register initialization optimization examples for each boot device: