| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| TraceSSEn | 25 | rw | 0x0 |
Trace start/stop control enable. The possible values of this bit are: 0 Tracing is unaffected by the trace start/stop logic. 1 Tracing is controlled by the trace on and off addresses configured for the trace start/stop logic. The trace start/stop resource is not affected by the value of this bit. |
| ExcIncFlag | 24 | rw | 0x0 |
Exclude/include flag. The possible values of this bit are: 0 Include. The specified address range comparators indicate the regions where tracing can occur. No tracing occurs outside this region. 1 Exclude. The specified address range comparators indicate regions to be excluded from the trace. When outside an exclude region, tracing can occur. |
| reserved | 23:4 | rw | 0x0 | Reserved |
| AddrCompSel | 3:0 | rw | 0x0 | When a bit is set to 1, it selects an address range comparator, 4-1, for include/exclude control. For example, bit [0] set to 1 selects address range comparator 1. |