Bad Block Management - Bad Block Management - 1.15 English - UG585

Zynq 7000 SoC Technical Reference Manual (UG585)

Document_ID
UG585
Release_Date
2026-02-06
Version
1.15 English

The BootROM manages bad blocks in the following ways:

  • It looks for a bad block table (BBT) in the last four blocks of the NAND flash device.
  • It supports a primary and secondary BBT with versioning allowing safe software updates.
  • If a BBT is not present, the BootROM scans the flash reading the out-of-band (OOB) information to determine the locations of bad blocks.
  • The BootROM only performs read operations – it does not write to the flash.

While reading from NAND, the BootROM skips blocks that are marked as bad in the BBT, or in the OOB information if a BBT does not exist.

For example: consider a flash device that has bad blocks located at blocks 1 and 3 (see the following figure):

Figure 1. NAND Flash Device with Bad Blocks Example