APU State After Reset - APU State After Reset - 1.15 English - UG585

Zynq 7000 SoC Technical Reference Manual (UG585)

Document_ID
UG585
Release_Date
2026-02-06
Version
1.15 English

The following table summarizes the state of the APU after the reset. For a CPU, including its L1 caches and MMU, this reset is a CPU reset that can be triggered through all resets. The reset to the SCU and the L2 cache can occur as a result of a system software reset, external system reset, debug system reset, and watchdog timer resets.

Table 1. APU State after Reset
Function State After Reset
CPU Kept in a WFE state while executing code located at address 0xFFFFFE00 to 0xFFFFFFF0

L1 Caches

Validation

Disabled

Unknown (requires invalidation prior to usage)

MMUs Disabled
SCU Disabled
Address Filtering Upper and lower 1M addresses within the 4G address space are mapped to OCM and the rest of the addresses are routed to the L2

L2 Cache

L2 wait states

Validation

Disabled

Tag RAM and Data RAM wait states are both 7-7-7 for setup latency, write access latency, and read access latency

Unknown (requires invalidation prior to usage)