Reference Clock Switching

UltraScale Architecture Clocking Resources User Guide (UG572)

Document ID
Release Date
1.10.2 English

The MMCM reference clock can be dynamically switched by using the CLKINSEL pin. The switching is done asynchronously. After the clock switches, the MMCM is likely to lose LOCKED and automatically lock onto the new clock. Therefore, after the clock switches, the MMCM must be reset. The MMCM clock MUX switching is shown in This Figure . The CLKINSEL signal directly controls the MUX. No synchronization logic is present.

Figure 3-8: Input Clock Switching

X-Ref Target - Figure 3-8