HSUL_DCI_12 and DIFF_HSUL_12_DCI

UltraScale Architecture SelectIO Resources User Guide (UG571)

Document ID
UG571
Release Date
2023-08-31
Revision
1.15 English
Table 1-47: Available I/O Bank Type

HR

HP

N/A

Available

DCI provides a tuned on-die input single termination to V CCO on the receivers and a tuned on-die source termination option (OUTPUT_IMPEDANCE) of 40 , 48 W, or 60 of driver impedance in HP I/O banks. The impedances are scaled from the reference resistor on the VRP pin. The driver output impedance is set to a default of 48 . The differential (DIFF_) versions use complementary single-ended drivers for outputs, and differential receivers for inputs.