The following table identifies the default switch settings for the SCU35. The table lists switches numerically and can
be located in Figure 1 by referring to the callout number located in a square
shape. Switches can be located in the schematic for more details.
| Callout Number | Ref. Des. | Function | Default |
|---|---|---|---|
| 01 | SW2 | PROGRAM_B (Not pressed, pulled high) |
Open |
| 02 | SW3-SW7 | GPIO PB (Not pressed, pulled low) |
Open |
| 03 | SW8 | CPU Reset PB (Not pressed, pulled high) |
Open |
| 04 | SW9 | GPIO DIP OFF = 0 = low ON = 1 = high |
OFF, OFF, OFF, OFF, OFF, OFF, OFF, OFF |