Making Manual Connections in a Design - 2024.1 English

MicroBlaze V Processor Embedded Design User Guide (UG1711)

Document ID
UG1711
Release Date
2024-08-01
Version
2024.1 English

The following figure shows how to connect the ILA SLOT_0_AXI or the clk pin to the clock and the AXI interface that requires monitoring in the design. You can do this manually.

As you move the cursor near an interface or pin connector on an IP block, the cursor changes to a pencil. Click an interface or pin connector on an IP block, and drag the connection to the destination block. The following figure illustrates the use of manual connections:

Figure 1. Manually Connecting Ports