| Field Name | Bits | Type | Reset Value | Description |
| Reserved | 31:20 | roRead-only | 0x0 | Reserved |
| DDR_read_delay | 19:16 | rwNormal read/write | 0x0 | DDR read delay: Delay the transmitted data by the programmed number of OSPI_REF_CLK cycles.This field is only relevant when DDR Read Command is executed. Otherwise can be ignored. (This applies to OSPI only) |
| Reserved | 15:9 | roRead-only | 0x0 | Reserved |
| dqs_enable | 8 | rwNormal read/write | 0x0 | DQS enable bit: If enabled, signal from DQS input is driven into RX DLL and is used for data capturing in PHY Mode rather than internally generated gated OSPI_REF_CLK. (This applies to OSPI only) |
| Reserved | 7:6 | roRead-only | 0x0 | Reserved |
| sample_edge_sel | 5 | rwNormal read/write | 0x0 | Sample edge selection: Choose edge on which data outputs from flash memory will be sampled |
| delay | 4:1 | rwNormal read/write | 0x0 | Read Delay: Delay the read data capturing logic by the programmed number of OSPI_REF_CLK cycles |