OSPI_CLK_CTRL (GLOBAL) Register Description
| Register Name | OSPI_CLK_CTRL |
|---|---|
| Offset Address | 0x0000000038 |
| Absolute Address | 0x00040A0038 () |
| Width | 32 |
| Type | mixedMixed types. See bit-field details. |
| Reset Value | 0x02000A00 |
| Description | This register controls the OSPI clock (This register is only reset on power cycle) |
OSPI_CLK_CTRL (GLOBAL) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| Reserved | 31:26 | razRead as zero | 0x0 | Reserved |
| CLKACT | 25 | rwNormal read/write | 0x1 | Clock active signal. 0 = Disable the clock 1 = Enable the clock |
| Reserved | 24:14 | razRead as zero | 0x0 | Reserved |
| DIVISOR | 13:8 | rwNormal read/write | 0xA | 6-bit divider. Only Applicable when OSC Core clock selected as source. |
| Reserved | 7:1 | razRead as zero | 0x0 | Reserved |
| SRCSEL | 0 | rwNormal read/write | 0x0 | 0 = Oscillator based clock (Freq = OSC_CORE_CLK freq/DIVISOR) ; 1 = EMCCLK (DIVISOR value below does not apply to clock when this is selected as source) After a change, this signal may be changed again only after 4 cycles of the old clock followed by 6 cycles of the new clock. |