DMA_SRC_CTRL2 (OSPI_QSPI) Register - DMA_SRC_CTRL2 (OSPI_QSPI) Register - UG1679

Kintex UltraScale+ Gen 2 and Spartan UltraScale+ FPGA Register Reference (UG1679)

Document_ID
UG1679
Release_Date
2026-08-12
Revision
1.2

DMA_SRC_CTRL2 (OSPI_QSPI) Register Description

Register NameDMA_SRC_CTRL2
Offset Address0x0000001024
Absolute Address 0x0004091024 ()
Width32
TypemixedMixed types. See bit-field details.
Reset Value0x0000FFF8
DescriptionSource DMA Control Register 2

DMA_SRC_CTRL2 (OSPI_QSPI) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
Reserved31:29razRead as zero0x0Reserved
ARCACHE26:24rwNormal read/write0x0Sets the ARCACHE bits on the AXI Read channel as follows:
Bit 0 - Sets the AXI ArCache[0] signal
Bit 1 - Sets the AXI ArCache[2] signal
Bit 2 - Sets the AXI ArCache[3] signal
Note: ArCache[1] is always driven to 1
Reserved23razRead as zero0x0Reserved
TIMEOUT_EN22rwNormal read/write0x00: The 2 Timeout counters are disabled
1: The 2 Timeout counters are enabled
TIMEOUT_PRE15:4rwNormal read/write0xFFFSet the prescaler value for the timeout in clk (~2.5ns) cycles (Refer to TIMEOUT_VALUE description). The TIMEOUT_PRE field is interpreted as follows:
12h000: Prescaler enables timer every cycle
12h001: Prescaler enables timer every 2 cycles
etc
12hFFF: Prescaler enables timer every 4096 cycles
MAX_OUTS_CMDS 3:0rwNormal read/write0x8Controls the maximum number of outstanding AXI read commands issued. The field is interpreted as follows:
4h0: Up to 1 Outstanding Read command allowed
4h1: Up to 2 Outstanding Read commands allowed
etc
4h8: Up to 9 Outstanding Read commands allowed
4h9 - 4hF: Invalid. Valid range is 4h0 to 4h8.